stream: experimental stream/iter implementation

[jasnell]

Opening this for discussion. Not intending to land this yet. It adds an implementation of the "new streams" to core and adds support to FileHandle with tests and benchmarks just to explore implementation feasibility, performance, etc.

This is an implementation of the "new streams" API for Node.js along with an example integration with FileHandle. This covers the core part of the implementation.

The module is stream/iter. It is gated behind the --experimental-stream-iter CLI flag.

Benchmark results comparing Node.js streams, Web streams, and stream/iter (higher number is better)

Benchmark	classic	webstream	iter	iter-sync	iter vs classic
Identity 1MB	1,245	582	3,110	16,658	2.5x
Identity 64MB	31,410	14,980	33,894	62,111	1.1x
Transform 1MB	287	227	325	327	1.1x
Transform 64MB	595	605	605	573	1.0x
Compression 1MB	123	98	110	--	0.9x
Compression 64MB	329	303	308	--	0.9x
pipeTo 1MB	1,137	494	2,740	13,611	2.4x
pipeTo 64MB	22,081	15,377	30,036	60,976	1.4x
Broadcast 1c 1MB	1,365	521	1,991	--	1.5x
Broadcast 2c 1MB	1,285	439	1,962	--	1.5x
Broadcast 4c 1MB	1,217	322	750	--	0.6x
File read 16MB	1,469	537	1,639	--	1.1x

It's worth noting that the performance of the FileHandle benchmarked added, that reads files, converts them to upper case and then compresses them, is on par with node.js streams and twice as fast as web streams. (tho... web streams are not perf optimized in any way so take that 2x with a grain of salt). The majority of the perf cost in the benchmark is due to compression overhead. Without the compression transform, the new stream can be up to 15% faster than reading the file with classic node.js streams.

The main thing this shows is that the new streams impl can (a) perform reasonably and (b) sit comfortably alongside the existing impls without any backwards compat concerns.

Benchmark runs:

fs/bench-filehandle-pull-vs-webstream.js n=5 filesize=1048576 api="classic": 0.4520276595366672
fs/bench-filehandle-pull-vs-webstream.js n=5 filesize=16777216 api="classic": 0.5974527572097321
fs/bench-filehandle-pull-vs-webstream.js n=5 filesize=67108864 api="classic": 0.6425952035725405
fs/bench-filehandle-pull-vs-webstream.js n=5 filesize=1048576 api="webstream": 0.1911778984563999
fs/bench-filehandle-pull-vs-webstream.js n=5 filesize=16777216 api="webstream": 0.2179878501077266
fs/bench-filehandle-pull-vs-webstream.js n=5 filesize=67108864 api="webstream": 0.2446390516960688
fs/bench-filehandle-pull-vs-webstream.js n=5 filesize=1048576 api="pull": 0.5118129753083176
fs/bench-filehandle-pull-vs-webstream.js n=5 filesize=16777216 api="pull": 0.6280697056085692
fs/bench-filehandle-pull-vs-webstream.js n=5 filesize=67108864 api="pull": 0.596177892010514
--- 
fs/bench-filehandle-pull-vs-webstream.js n=5 filesize=1048576 api="classic": 0.44890689503274533
fs/bench-filehandle-pull-vs-webstream.js n=5 filesize=16777216 api="classic": 0.5922959407897667
fs/bench-filehandle-pull-vs-webstream.js n=5 filesize=67108864 api="classic": 0.6151916200977057
fs/bench-filehandle-pull-vs-webstream.js n=5 filesize=1048576 api="webstream": 0.22796906713941217
fs/bench-filehandle-pull-vs-webstream.js n=5 filesize=16777216 api="webstream": 0.2517499148269662
fs/bench-filehandle-pull-vs-webstream.js n=5 filesize=67108864 api="webstream": 0.2613608248108332
fs/bench-filehandle-pull-vs-webstream.js n=5 filesize=1048576 api="pull": 0.4725187688512099
fs/bench-filehandle-pull-vs-webstream.js n=5 filesize=16777216 api="pull": 0.5180217625521253
fs/bench-filehandle-pull-vs-webstream.js n=5 filesize=67108864 api="pull": 0.616770183722841

Opencode/Opus 4.6 were leveraged heavily in the process of creating this PR following a strict iterative jasnell-in-the-loop process.

--
Reviewing Guide

The draft spec this is implementing is located at https://stream-iter.jasnell.me/

The implementation is primarily in lib/internal/streams/iter ... that's where you should start. The functionality is split between key files by operation, which should make it easier to review.

The tests are in parallel prefixed as test-stream-iter-*, they are organized also by functional area.

The are benchmarks in bench/streams prefixed with iter-*.

[nodejs-github-bot]

Review requested:

• @nodejs/performance
• @nodejs/streams

[ronag]

Super impressed! This is amazing.

One note. Since this is supposed to be "web compatible" it looks to me like everything is based on Uint8Array which is a bit unfortunate for Node. Could the node implementation use Buffer it would still be compatible it's just that we can access the Buffer prototype methods without doing hacks like Buffer.prototype.write.call(...).

[ronag]

Also could you do some mitata based benchmarks so that we can see the gc and memory pressure relative to node streams?

[ronag]

Another thing, in the async generator case, can we pass an optional AbortSignal? i.e. async function * (src, { signal }). We maybe could even check the function signature and if it doesn't take a second parameter don't allocate the abort controller at all.

[jasnell]

One note. Since this is supposed to be "web compatible" it looks to me like everything is based on Uint8Array which is a bit unfortunate for Node. Could the node implementation use Buffer it would still be compatible it's just that we can access the Buffer prototype methods without doing hacks like Buffer.prototype.write.call(...).

This makes me a bit nervous for code portability. If some one starts working with this in node.js, they would end up writing code that depends on the values being Buffer and not just Uint8Array. They go to move that to another runtime implementation or standalone impl like https://github.com/jasnell/new-streams and suddenly that assumption breaks.

[benjamingr]

just to explore implementation feasibility, performance, etc

Sounds fine as this isn't exposed outside at the time

[benjamingr]

I'm not sure strict should be the default and not block here.

[jasnell]

That'll be a big part of the discussion around this. A big part of the challenge with web streams is that backpressure can be fully ignored. One of the design principles for this new approach is to apply it strictly by default. We'll need to debate this. Recommend opening an issue at https://github.com/jasnell/new-streams

[benjamingr]

sorry meant to approve, regardless of design changes/suggestions regarding timing and a lot of other stuff as experimental this is fine.

I would maybe update the docs to emphasize the experimentality even further than normal

[jasnell]

@ronag ... implemented a couple of mitata benchmarks in the https://github.com/jasnell/new-streams repo (the reference impl)

--

Memory Benchmark Results

Environment: Node 25.6.0, Intel Xeon w9-3575X, --expose-gc, mitata with .gc('inner')

Per-Operation Allocations (New Streams vs Web Streams)

Scenario	Speed	Heap/iter (new)	Heap/iter (web)
Push write/read (1K x 4KB)	2.24x faster	2.06 MB	1.43 MB
Pull + transform (1K x 4KB)	2.44x faster	334 KB	5.57 MB
pipeTo + transform (1K x 4KB)	3.15x faster	303 KB	7.47 MB
Broadcast 2 consumers (500 x 4KB)	1.04x faster	1.92 MB	1.81 MB
Large pull 40MB (10K x 4KB)	1.26x faster	2.62 MB	52.35 MB

Pipeline scenarios (pull, pipeTo) show the biggest gains: 16-25x less heap because transforms are inline function calls, not stream-to-stream pipes with internal queues. Push is faster but uses slightly more heap due to batch iteration (Uint8Array[]). Broadcast/tee are comparable at this scale.

Sustained Load (97.7 MB volume)

Scenario	Peak Heap (new)	Peak Heap (web stream)
pipeTo + transform	6.9 MB	50.6 MB
Broadcast 2 consumers	0.5 MB	42.8 MB
Push write/read	5.9 MB	2.5 MB
Pull + transform	6.1 MB	2.8 MB

pipeTo and broadcast show the largest sustained-load heap difference. Web Streams' pipeThrough chain buffers ~50% of total volume in flight; new streams' pipeTo pulls synchronously through the transform. Broadcast's shared ring buffer (0.5 MB) vs tee's per-branch queues (42.8 MB).

Zero retained memory for both APIs after completion -- no leaks.

[jedwards1211]

@ronag passing a signal to an async generator allows the underlying source to abort it, but we're lacking a builtin way for the consumer iterating the async generator to safely cancel the stream. It can .return() its iterator when it's done, but that won't break the async generator and until it receives the next chunk, which isn't guaranteed to happen if the underlying source is something nondeterministic like pubsub events. In this case, there would be leaks that are kind of awkward to blame on user error.

Barring an improvement at the language level, the consumer can only safely cancel the underlying source if it has a reference to an AbortController that signals it.

WHATWG Streams don't have this problem if the consumer .cancel()s their reader, though they do if the consumer is async iterating them.

Happy to create examples to reproduce this if it's not clear what I'm talking about.

[ronag]

I think you misunderstand. The signal would be for any async calls inside the generator.

[jedwards1211]

Yes, I'm just saying that doesn't allow the consumer to abort calls the async generator is making, but the consumer often decides when streaming should be aborted.

For example say I'm using a library that handles subscriptions from the frontend. When it gets a subscription it asks me to build an async iterable of events to stream back. Then it's responsible for iterating, then cancelling once the frontend unsubscribes. If the iterable I pass to that library is from an async generator, I'll have to also pass an AbortController to that library for it to safely clean up once the client unsubscribes. If all it has is an AsyncIterable interface, it may leak resources after the client unsubscribes.

This is a fundamental weakness in using async generators for transformation and my longtime frustration with async iteration in general.

In contrast, with WHATWG streams, when a consumer cancels its reader, the underlying source and any TransformStreams and get notified to clean up right away.

[jedwards1211]

@benjamingr was actually talking about the same thing I'm trying to resurrect awareness of in this old issue in the async-iteration proposal

Note one of his comments: tc39/proposal-async-iteration#126 (comment)

This was eight years ago but there hasn't been much improvement on this front, unfortunately.

I'm really hoping I can get everyone to fully understand this pitfall and have a good plan for how to help people avoid it before getting too far along with this new proposed API.

[jasnell]

Landed in 9289ad5...e78ccd8

[jasnell]

Just realized I had mislabeled this :-/ @aduh95 ... as a new module (following in the pattern of .../promise modules, this should be semver-major per our guidelines. I had meant to label it major but had selected minor by accident and just noticed.

/cc @aduh95